014-1065-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Pneumatische membraampompen avoiding grease flow interruptions by

avoiding grease flow interruptions by air pockets in the grease bed

Inlet : F1/4"G

Handbediende vetpomp geschikt voor 18 - 30 kg emmers

It is particularly advised for the use with high viscosity lubricants and medias (from 200CPS to 500CPS)

These pumps are advised for the transfer of low viscosity oil (SAE 15/80)

014-1065-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Pneumatische membraampompen avoiding grease flow interruptions byIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.